DC motor is a rotating motor that can transform DC electric vitality into mechanical vitality (DC motor) or mechanical strength into DC electric strength (DC generator). It is a motor that can transform DC and mechanical power into 1 one more. When it runs as a motor, it is a direct current motor, which converts electrical power into mechanical vitality when it runs as a generator, it is a immediate present generator, which converts mechanical energy into electrical energy.
|Merchandise Identify||100kw 200kw 300kw 440v 500v 550v DC Motor|
|Motor Kind||DC Motor,ACMotor,Stepper Motor,Asynchronous Motor ,Synchronous Motor
|Composition framework||The composition of DC motor ought to consist of two elements: stator and rotor. The static portion of DC motor is known as stator. The principal perform of stator is to make magnetic subject, which is composed of foundation, principal magnetic pole, commutation pole, end cap, bearing and brush gadget. Working component is referred to as rotor, whose primary operate is to generate electromagnetic torque and inductive electromotive drive. It is the hub of energy conversion of DC motor. So it is also generally known as armature, which is made up of rotor, armature core, armature winding, commutator and enthusiast.|
|Torque range||one.five ~180kNm|
|Safety stage||IP23, IP44|
|Running velocity||Constant Velocity /Minimal Velocity /Change Pace /High Speed Other|
|Primary classification||DC Motor is a machine that converts mechanical power into DC energy. It is mainly utilized as DC motor for DC motor, electrolysis, electroplating, smelting, charging and excitation energy offer of alternator. Though in places the place DC energy is essential, AC power rectifier is also employed to change AC into DC electricity, but from some aspects of overall performance, AC rectifier electrical power supply can not entirely replace DC generator.|
|Application||DC motors are widely utilized in tape recorders, video recorders, video discs, electrical shavers, hair dryers, electronic watches, toys and so on.|
|Upkeep technique||Expert motor servicing centre motor upkeep method: cleaning stator and rotor – replacing carbon brush or other areas – vacuum F force dipping paint – drying – Calibration stability.
one. Use environment must be often dry, motor area must be held thoroughly clean, air ingestion need to not be hindered by dust, fibers and other road blocks.
two. When the thermal security of the motor carries on to function, it should be ascertained whether or not the fault arrives from the motor or the overload or the environment benefit of the protective unit is too reduced. Following reducing the fault, it can be set into procedure.
3, make certain that the motor is properly lubricated for the duration of operation. The general motor operates for about 5000 hrs, that is to say, lubricating grease ought to be additional or changed. When bearing overheating or lubricating deterioration is found in operation, the hydraulic force need to alter lubricating grease in time. When replacing grease, the old grease need to be removed, and the oil groove of bearing and bearing include should be washed with gasoline. Then ZL-three lithium grease must be crammed with one/2 (2 poles) and 2/3 (4 poles, six poles and 8 poles) of the cavity between the internal and outer rings of the bearing.
4. When the daily life of the bearing is above, the vibration and sound of the motor will enhance naturally. When the radial clearance of the bearing reaches the adhering to worth, the bearing should be changed.
5, when eliminating the motor, it is Okay to eliminate the rotor from the shaft extension or the non extension finish. If it is not needed to unload the enthusiast, it is more hassle-free to consider out the rotor from the non-axle extension finish. When pulling out the rotor from the stator, the stator winding or insulation must be prevented from being broken.
6. When replacing the windings, the form, measurement, turns and gauges of the authentic windings need to be recorded. When these information are missing, they ought to be received from the manufacturer and the first developed windings should be modified at will, which often deteriorates one or several functionality of the motor or even makes it impossible to use them.