Brushless Direct Recent Motor with Driver
57IV90/57IV130/57IV180 Characteristics
one.Operating voltage: DC enter voltage 15VDC to 50VDC ,advocate voltage is 36V
2.The max constant output present is 10A, the max peak present is 22A (3 occasions overload capability)
three.Suitable differential or one-ended pulse / path command, have 3 control mode of situation, speed and torqe
four.Using FOC magnetic placement manage technological innovation and space vector pulse width modulation (SVPWM) shut-loop manage technological innovation
5.The quantity of pulses for every cycle (subdivision) can be set by the debug software or the dial swap setting(digital gear ratio)
six.Have 3 kinds of 90w,130w and 180w DC brushless servo motor to pick.
seven.Have protection of overvoltage, undervoltage, overcurrent and tolerance,etc.
eight.One / double pulse manner, the pulse legitimate edge can be pick.
nine.The max pulse frequency of control instruction is 500KHz (manufacturing facility default is 200KHz)
ten.Pulse, path and permit sign input interface stage is 4.five to 28V appropriate
11.With serial RS232 / RS485 debugging function, but require to use our unique serial debugging cable
twelve.Performance: sleek pace, tiny overshoot ,modest tracking mistake, minimal warmth of motor and driver
Advantage
This servo motor system is manufactured up of brushless servo motor with driver developed-in.Compact and small size is suited for some area that has requirement of quantity.It has much less wiring to decrease errors,keep steady and straightforward for set up.This integrated servo technique has good speed adjustment functionality,massive starting up torque,smooth operation, large rotating velocity.The price is much decrease than AC servo motor, but some performances are better than AC servo products.
Driver Product And Choice Xihu (West Lake) Dis.
| Motor Type | 57IV90 | 57IV130 | 57IV180 | |
| Rated power(W) | 90W | 130W | 180W | |
| Vector Maximum Current | 16A | 18A | 22A | |
| Body Length(MM) | 106.2 0.five | 126.2 0.5 | 146.2 0.5 | |
| Operation Voltage | fifteen-50Vdc,36Vdc recommend | |||
| Overvoltage Protection Voltage | 68Vdc±2 | |||
| Control Method | 32 bits DSP vector FOC control technology | |||
| Pulse Limit Frequency | 500KHz(factory default 200KHz) | |||
| Protection | Overcurrent, overvoltage, undervoltage and tracking error tolerance alarm | |||
| Input Signal | Pulse, direction and enable differential / single-ended interface signal, interface level 4.5-28Vdc compatible, no need external current limiting resistor |
|||
| Output Signal | Alarm / in-position signal OC output, the output capacity is100mA, need external pull-up resistor, the maximum pull up voltage is 24Vdc |
|||
| Electronic Gear Ratio | Default 4000 / rev, through the DIP switch or debug software setting subdivision (200-51200) |
|||
| Position Error Control Accuracy | ±1 Pulse | |||
| Speed Control Accuracy | ±2 rpm | |||
| Maximum Acceleration | 100 rpm/ms | |||
Dialing Change Configurations
| Pulse/Rev. | SW1 | SW2 | SW3 | SW4 |
| Default | ON | ON | ON | ON |
| 800 | OFF | ON | ON | ON |
| 1600 | ON | OFF | ON | ON |
| 3200 | OFF | OFF | ON | ON |
| 6400 | ON | ON | OFF | ON |
| 12800 | OFF | ON | OFF | ON |
| 25600 | ON | OFF | OFF | ON |
| 51200 | OFF | OFF | OFF | ON |
| a thousand | ON | ON | ON | OFF |
| 2000 | OFF | ON | ON | OFF |
| 4000 | ON | OFF | ON | OFF |
| 5000 | OFF | OFF | ON | OFF |
| 8000 | ON | ON | OFF | OFF |
| 10000 | OFF | ON | OFF | OFF |
| 20000 | ON | OFF | OFF | OFF |
| 40000 | OFF | OFF | OFF | OFF |
Subdivision accuracy (electronic gear ratio) :When SW1, SW2, SW3, SW4 are ON, the generate utilizes the internal default micro-stage subdivision, the default internal subdivision of the driver is 400Pulse / rev, and the electronic equipment ratio can also be established by the debugging software. SW5 established the motor course,when turnON, the motor turns clockwise (CW),when turn OFF, the motor turns counterclockwise(CCW). SW6 management mode choice, whenON, the motor enters the self-check method,creating a single CZPT and reverse revolution, has been repeated until exit self-examination manner, the external management signal is invalid at self test manner, whenOFF, the motor exits self-take a look at method,then the exterior control sign is legitimate.
Mechanical Composition Dimension
| Driver mode | Motor body length(mm) | Driver thickness(mm) | Integrated motor driver length(mm) |
| 57IV90 | seventy six | thirty.2 | 106.two |
| 57IV130 | ninety six | 30.two | 126.two |
| 57IV180 | 116 | 30.2 | 149.2 |
Note : All earlier mentioned is generally employed, and we can personalize according to your ask for or decide on the suitable design for you, remember to explain to us adhering to parameters: current, voltage, holding torque, entire body duration,the application location.
Application
Suitable for all kinds of modest and medium-sized automation equipments and instruments. Such as: laser gear, health care equipment, 3D printer, little and medium-sized engraving equipment, digital processing products, computerized crawling gear, specific CNC machine instrument, packaging gear and robotic. It is especially beneficial for customers who anticipate low sounds and substantial pace purposes.
Packaging and shipping and delivery
1.Outer packing: CZPT export carton with necessary delivery marks
2.Inner packing: Watertight packing with shock absorbing EPE and cardboard surrounded
three.As for each the customers specifications
Our services
one.Operating time : eight:00 a.m – ten:00 p.m .Any inquiries, remember to explain to us freely, we will be reply you asap.
2.Guide time : For samples, 2 to 5 days will be Alright. For mass production, the guide time rely on the portions you need to have.
three.Warrantity time period : 18 months and Daily life-lengthy routine maintenance provider for the solution.
4.We accept goods personalize.
FAQ
Q1: How to pick the suited stepper or servo motor?
A1: There are serveral important objects: dimension, duration, keeping torque, voltage, current etc.Soon after verify them and instructed us, we can select the suited 1 for you.
Q2: Any other strategies to finalize the design?
A2: Certain, you can send us the design you are utilizing, we can help you locate the suitable a single.
Q3:How to ensure the Quality of CZPT Components?
A3: We have the built-in program for industrial areas high quality handle. We have IQC (incoming quality control), IPQCS (in method top quality management area), FQC (closing high quality management) and OQC (out-going quality control) to manage each procedure of industrial parts prodution.
This autumn:What is actually the Edge of Your Elements for Market Merchandise?
A4:1.The gain of our products is the competitive charges, fast shipping and higher top quality. Our
employees are dependable-oriented, pleasant-oriented,and diligent-oriented. Our merchandise are showcased by strict tolerance, sleek complete and extended service time.
two.Prior to we deliver out the items,we examine them a lot more than a few times.
Get in touch with
