Torsion bar Synchronous NC Press Brake
Product: KCN-30060
two Axis CNC Handle(X, Y,)
X: Backgauge front and back Y: Ram stroke
W: Worktable crowning (optional)
Primary functions and attributes
General welded and processed construction.
Large mechanical power and robust rigidity.
Ram stroke hydraulic approaching downward, stable and trustworthy.
E21 can handle the motion of ram stroke and backgauge, attaining efficient and extremely exact positioning.
Wedge compensation on prime punch clamping.
Simplified leading blades clamping with micro-adjustment wedges,for effortless procedure and higher precision.
two Sliding entrance sheet assist arms mounted onto T slot of the bed.
Solid 1 block four confront multi V die.
Authorized secure and reputable hydraulics.
Stop fingers with milscale for plate bending machine.
CZPT Parameters
| No. | Item | Parameter | Device |
| one | Nominal stress | 3000 | KN |
| two | Table length | 6000 | mm |
| three | Max.Slider stroke | 250 | mm |
| 4 | Max.Shut peak | 530 | mm |
| 5 | In between columns | 4800 | mm |
| six | Throat depth | four hundred | mm |
| 7 | Main motor energy | 22 | KW |
| eight | Down Pace | 90 | mm/S |
| 9 | Pressing Velocity | 8 | mm/S |
| 10 | Return Pace | eighty | mm/S |
| 11 | Handle axes | X+Y | / |
| 12 | X axes Stroke | five hundred | mm |
| 13 | Backgauge Stoppers | two | / |
| 14 | Total dimension | L 6500 | mm |
| W 2300 | mm | ||
| H 3600 | mm | ||
| 15 | Weight | 27500 | kg |
Backgauge with ball screw and round guidebook
Multifunction adjustment of the tightening wheel.
Manual desk crowning(optional).
Siemens primary motor German model.
CZPTpean fashion quick launch clamping
The guideway use the brass, put on-resisting, long provider life.
Pedal swap with unexpected emergency cease, protected procedure, the foundation with rollers simple to move.
The torsion bar is synchronized with the equipment rack. ram down quick, simple to alter the two sides of the synchronization.The connector use put on – resistant brass.
The stopper up and down by guide, move left and right on two linear guides.
Principal configuration
| Name | Producer |
| CNC controller | E21 Estun China Model |
| Main motor | Siemens Germany brand |
| CZPTal factors | Schneider France manufacturer |
| Gear pump | Sunny USA brand |
| Seal ring | NOK Japan manufacturer |
| CZPT system | Boschrexroth Germany brand |
| Ball screw ,CZPT guidebook | HIWIN ZheJiang brand |
| Tubing connector | EMB Germany Brand name |
| Variable frequency drive | Shihlin ZheJiang brand |
E21 NC controller
Backgauge and block manage
Management for general AC motors, frequency inverter CZPT positioning
Inventory counter Holding/decompression time placing
Software memory of up to 40 packages Up to 25 steps for each program
1 side positioning Retract perform
One particular important backup/restore of parameters mm/inch
Chinese /English
The standard accessories are in the below:
- Anchor bolt
- Hex nut
- Seal ring
- Gasket
- Grease gun
- Allen wrench
- Foot change
- Entrance assist arms
- CZPTal box crucial, control panel essential
- Procedure manuals
Packing
Push brake is packaged by plastic,toolings are packaged by picket.
Our Provider
Pre-income providers:
1. inquiry and consulting support
2. sample testing help
three. visit our manufacturing unit
Following-revenue solutions:
one. two a long time warranty period of time
2. coaching how to put in and use the brake press machine
three. engineers CZPT to services equipment overseas
