China Hot selling Flange Motor Guide Shaft Coupling Connector Shaft Accessory DIY RC Mode motor coupling

Product Description

 

Product Description

 

The product has a compact structure, a compact body, and is made of iron. It is not easy to rust after galvanizing treatment, and has undergone heat treatment and electroplating, with toughness and insulation. High strength, high precision, durability, smooth surface, no burrs, good practicality, small screw hole 180 degree design, easy to install and replace.
Flange nut is a type of nut with a wide flange at 1 end, used as an integral non rotating washer and widely used for connecting car model shafts. Exquisite and practical, with high structural strength and firmness. The perfect accessory for RC model motors.

 

 

 

 

 

Specification and model

Shaft aperture D1

Shaft aperture D2

outside  diameter

entire length

( mm )

( mm )

( mm )

( mm )

 

190802

2

2

19

9

190803

3

3

19

9

221

4

4

22

10.5

221

5

5

31

13

 

 

 

Due to too many product specifications and models, they cannot be displayed 1 by 1 on the front desk. Specific specifications are required
The model can be consulted with customer service.

Detailed Photos

 

Full length sample drawing, sample processing, and customization of various irregular parts
Due to product specifications, production process, order quantity, and product requirements
Due to differences and fluctuations in raw materials, product prices may randomly vary significantly
Distance: The price of our company’s products varies with the price of raw materials and the level of drawing technology
Transformation. So the product prices we have marked are for reference only, in order to obtain accurate quotes
Price, please contact our customer service personnel for understanding.

Our Advantages

Customization process:
Scheme design – Product sampling – Scheme confirmation – Sample confirmation – Batch production – Quality inspection and shipment

Company Profile

Certifications

 

FAQ

system certification:
ISO 9 , GMP , BSCI , BRC , SA 8
ownership type:
Limited Company
registered capital:
10000000 RMB
site area:
101~500 square meter

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

motor coupling

How to Select the Right Motor Coupling for Specific Torque and Speed Requirements?

Selecting the right motor coupling for specific torque and speed requirements is crucial to ensure optimal performance and reliability in a power transmission system. Here are the steps to guide you through the selection process:

1. Identify Torque and Speed Requirements:

Determine the torque and speed requirements of your application. Torque is the rotational force needed to perform the intended task, while speed refers to the rotational speed at which the coupling will operate.

2. Consider Operating Conditions:

Take into account the environmental conditions and operating parameters of your application. Factors such as temperature, humidity, and potential shock loads may influence the coupling’s performance.

3. Calculate Torque and Speed Ratios:

Calculate the torque and speed ratios between the motor and driven equipment. This will help you understand the required torque capacity and misalignment capabilities of the coupling.

4. Choose the Coupling Type:

Select a coupling type that aligns with your torque and speed requirements. For higher torque applications, consider gear couplings, while elastomeric couplings are suitable for lower torque applications with misalignment needs.

5. Check Torque and Speed Ratings:

Consult the manufacturer’s specifications to ensure the selected coupling can handle the calculated torque and speed requirements. Pay attention to both the continuous and peak torque ratings.

6. Misalignment Compensation:

If your application requires misalignment compensation, opt for flexible couplings that can accommodate angular and/or parallel misalignment.

7. Consider Critical Speed:

For high-speed applications, check the coupling’s critical speed rating. Operating near or beyond the critical speed can lead to resonance and coupling failure.

8. Verify Service Life:

Check the expected service life of the coupling under your application’s conditions. A coupling with a longer service life can reduce maintenance needs and downtime.

9. Budget and Cost:

Consider the budget and overall cost of the coupling, including installation and maintenance expenses. Balance the initial cost with the coupling’s expected performance and durability.

10. Seek Expert Advice:

If you are unsure about the best coupling choice for your specific requirements, consult with coupling manufacturers or industry experts who can provide valuable insights and recommendations.

By following these steps and conducting thorough research, you can confidently select the right motor coupling that matches your torque and speed requirements, ensuring efficient power transmission and prolonged equipment lifespan.

“`motor coupling

Specific Safety Precautions When Working with Motor Couplings

Working with motor couplings involves handling mechanical components and power transmission systems, which can pose certain safety risks. It is essential to follow specific safety precautions to prevent accidents and ensure the well-being of personnel. Here are some safety measures to consider:

1. Lockout/Tagout Procedures:

Prior to any maintenance or installation work on motor couplings, follow lockout/tagout procedures to isolate the power source and prevent accidental startup. This ensures the motor and equipment are de-energized, reducing the risk of electrical hazards.

2. Personal Protective Equipment (PPE):

Wear appropriate personal protective equipment, including safety goggles, gloves, and steel-toed shoes, when working with motor couplings. PPE provides protection against potential hazards such as flying debris or pinch points.

3. Proper Lifting Techniques:

When handling heavy couplings or equipment, use proper lifting techniques to avoid strain or injury. Seek assistance if needed to lift and position larger components safely.

4. Inspect Coupling Condition:

Before any work, inspect the coupling for signs of wear, damage, or misalignment. Do not work with a damaged coupling, as it may compromise system integrity and safety.

5. Avoid Excessive Force:

Avoid applying excessive force or using tools that are not appropriate for the job when installing or removing couplings. Excessive force can lead to component failure or personal injury.

6. Follow Manufacturer Guidelines:

Adhere to the manufacturer’s guidelines and instructions during installation, maintenance, and troubleshooting processes. Manufacturer recommendations are designed to ensure safe and proper operation.

7. Regular Inspection and Maintenance:

Implement regular inspection and maintenance schedules for motor couplings and associated equipment. Identify and address any issues promptly to prevent potential hazards or failures.

8. Keep Work Area Clean:

Keep the work area clean and free of clutter. A tidy workspace reduces the risk of accidents and improves overall efficiency.

9. Avoid Contact with Rotating Components:

When the motor is energized, avoid contact with rotating coupling components to prevent injury. Ensure the system is de-energized during maintenance tasks.

10. Training and Competence:

Ensure that personnel working with motor couplings are adequately trained and competent in the procedures and safety measures related to coupling installation, maintenance, and operation.

By following these safety precautions, you can minimize risks and create a safer working environment when handling motor couplings and associated power transmission systems.

“`motor coupling

How Does a Flexible Motor Coupling Differ from a Rigid Motor Coupling?

Flexible motor couplings and rigid motor couplings are two distinct types of couplings used to connect motors to driven equipment. They differ significantly in their design, function, and applications:

Flexible Motor Coupling:

A flexible motor coupling is designed to accommodate misalignment between the motor shaft and the driven equipment shaft. It uses flexible elements, such as elastomeric materials, to provide some degree of flexibility and damping. The key differences are:

  • Misalignment Compensation: Flexible couplings can handle both angular and parallel misalignment between the motor and driven equipment shafts. This flexibility reduces stress on bearings and allows for a smoother transmission of torque.
  • Shock Absorption: The elastomeric elements in flexible couplings can absorb and dampen vibrations and shock loads, protecting the motor and driven equipment from damage.
  • Applications: Flexible couplings are commonly used in applications where misalignment is expected, such as pumps, compressors, conveyors, and machine tools.

Rigid Motor Coupling:

A rigid motor coupling provides a solid and inflexible connection between the motor shaft and the driven equipment shaft. It does not allow any misalignment and offers a direct torque transmission path. The key differences are:

  • No Misalignment Compensation: Rigid couplings do not accommodate misalignment between the motor and driven equipment shafts. Proper alignment is critical for their efficient operation.
  • Stiffness: Rigid couplings offer high torsional stiffness, maintaining precise alignment between the shafts and enabling accurate torque transmission.
  • Applications: Rigid couplings are used in applications where precise alignment is required, such as high-precision machine tools, robotics, and applications with low or negligible misalignment.

The choice between a flexible motor coupling and a rigid motor coupling depends on the specific requirements of the application. Flexible couplings are preferred when misalignment is expected, while rigid couplings are suitable for applications where precise alignment and direct torque transmission are essential for the system’s performance.

“`
China Hot selling Flange Motor Guide Shaft Coupling Connector Shaft Accessory DIY RC Mode   motor couplingChina Hot selling Flange Motor Guide Shaft Coupling Connector Shaft Accessory DIY RC Mode   motor coupling
editor by CX 2024-04-15

motor coupling

As one of leading motor coupling manufacturers, suppliers and exporters of mechanical products, We offer motor coupling and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of motor coupling

Recent Posts